Tires should always be kept in good condition and maintained properly. The tires should also be changed as they wear out and preferably the whole set should be changed at the same time to ensure that you have the same grip all around the car. The best way to obtain this is to rotate the tires to even out any differences in wear, which often occurs between the front and the rear tires. If you change between all-season tires and winter tires, this tends to be a good time to rotate the tires.
When the time to change tires comes it will mostly be because they are worn out, which is defined as reaching a tread depth of 5/32 inches. When you go below 5/32 inches you lose a lot of the tire’s key properties. Your grip will decrease, your braking distance will be prolonged, and you are more likely to skid when you take sharp corners. The risk for hydroplaning also increases. This is why it is important to know when you reach this 5/32-inch threshold. This is why it is important to check your tread depth regularly.
Once you notice that you have reached the threshold, it is time to drive to a tire shop and purchase a new set of tires. The tire shop will often be able to change the tires for you so that you can leave with the new set of tires and they will make sure that the old tires will be recycled so that you don’t have to worry about getting rid of the old tires. High quality tires tend to last longer, as they will often have a low rolling resistance. The low rolling resistance means low tire wear and low fuel consumption, so you will save money as you drive versus tires that might be cheaper to purchase.
For more information regarding worn out tires, visit: nokiantires.com